Azure Security Center has identified that some of your subnets aren't protected with a next generation firewall. Protect your subnets from potential threats by restricting access to them with Azure Firewall or a supported next generation firewall
The following 56 compliance controls are associated with this Policy definition '[Preview]: All Internet traffic should be routed via your deployed Azure Firewall' (fc5e4038-4584-4632-8c85-c0448d374b2c)
Protect resources using Network Security Groups or Azure Firewall on your Virtual Network
Customer
Ensure that all Virtual Network subnet deployments have a Network Security Group applied with network access controls specific to your application's trusted ports and sources. Use Azure Services with Private Link enabled, deploy the service inside your Vnet, or connect privately using Private Endpoints. For service specific requirements, please refer to the security recommendation for that specific service.
Alternatively, if you have a specific use case, requirements can be met by implementing Azure Firewall.
General Information on Private Link:
https://docs.microsoft.com/azure/private-link/private-link-overview
How to create a Virtual Network:
https://docs.microsoft.com/azure/virtual-network/quick-create-portal
How to create an NSG with a security configuration:
https://docs.microsoft.com/azure/virtual-network/tutorial-filter-network-traffic
How to deploy and configure Azure Firewall:
https://docs.microsoft.com/azure/firewall/tutorial-firewall-deploy-portal
Deny communications with known malicious IP addresses
Customer
Enable DDoS Standard protection on your Azure Virtual Networks to guard against DDoS attacks. Use Azure Security Center Integrated Threat Intelligence to deny communications with known malicious IP addresses.
Deploy Azure Firewall at each of the organization's network boundaries with Threat Intelligence enabled and configured to "Alert and deny" for malicious network traffic.
Use Azure Security Center Just In Time Network access to configure NSGs to limit exposure of endpoints to approved IP addresses for a limited period.
Use Azure Security Center Adaptive Network Hardening to recommend NSG configurations that limit ports and source IPs based on actual traffic and threat intelligence.
How to configure DDoS protection:
https://docs.microsoft.com/azure/virtual-network/manage-ddos-protection
How to deploy Azure Firewall:
https://docs.microsoft.com/azure/firewall/tutorial-firewall-deploy-portal
Understand Azure Security Center Integrated Threat Intelligence:
https://docs.microsoft.com/azure/security-center/security-center-alerts-service-layer
Understand Azure Security Center Adaptive Network Hardening:
https://docs.microsoft.com/azure/security-center/security-center-adaptive-network-hardening
Understand Azure Security Center Just In Time Network Access Control:
https://docs.microsoft.com/azure/security-center/security-center-just-in-time
Ensure that all Azure virtual networks follow an enterprise segmentation principle that aligns to the business risks. Any system that could incur higher risk for the organization should be isolated within its own virtual network and sufficiently secured with either a network security group (NSG) and/or Azure Firewall.
Based on your applications and enterprise segmentation strategy, restrict or allow traffic between internal resources based on network security group rules. For specific well-defined applications (such as a 3-tier app), this can be a highly secure "deny by default, permit by exception" approach. This might not scale well if you have many applications and endpoints interacting with each other. You can also use Azure Firewall in circumstances where central management is required over a large number of enterprise segments or spokes (in a hub/spoke topology).
Use Azure Security Center Adaptive Network Hardening to recommend network security group configurations that limit ports and source IPs based with the reference to external network traffic rules.
Use Azure Sentinel to discover the use of legacy insecure protocols such as SSL/TLSv1, SMBv1, LM/NTLMv1, wDigest, Unsigned LDAP Binds, and weak ciphers in Kerberos.
How to create a network security group with security rules: https://docs.microsoft.com/azure/virtual-network/tutorial-filter-network-traffic
How to deploy and configure Azure Firewall: https://docs.microsoft.com/azure/firewall/tutorial-firewall-deploy-portal
Adaptive Network Hardening in Azure Security Center: https://docs.microsoft.com/azure/security-center/security-center-adaptive-network-hardening
Azure Sentinel insecure protocols workbook:https://docs.microsoft.com/azure/sentinel/quickstart-get-visibility#use-built-in-workbooks
Protect applications and services from external network attacks
Customer
Protect Azure resources against attacks from external networks, including distributed denial of service (DDoS) Attacks, application specific attacks, and unsolicited and potentially malicious internet traffic. Azure includes native capabilities for this:
- Use Azure Firewall to protect applications and services against potentially malicious traffic from the internet and other external locations.
- Use Web Application Firewall (WAF) capabilities in Azure Application Gateway, Azure Front Door, and Azure Content Delivery Network (CDN) to protect your applications, services, and APIs against application layer attacks.
- Protect your assets against DDoS attacks by enabling DDoS protection on your Azure virtual networks.
- Use Azure Security Center to detect misconfiguration risks related to the above.
Azure Firewall Documentation: https://docs.microsoft.com/azure/firewall/
How to deploy Azure WAF: https://docs.microsoft.com/azure/web-application-firewall/overview
Manage Azure DDoS Protection using the Azure portal: https://docs.microsoft.com/azure/virtual-network/manage-ddos-protection
Deploy intrusion detection/intrusion prevention systems (IDS/IPS)
Customer
Use Azure Firewall threat intelligence-based filtering to alert on and/or block traffic to and from known malicious IP addresses and domains. The IP addresses and domains are sourced from the Microsoft Threat Intelligence feed. When payload inspection is required, you can deploy a third-party intrusion detection/intrusion prevent system (IDS/IPS) from Azure Marketplace with payload inspection capabilities. Alternately you can use host-based IDS/IPS or a host-based endpoint detection and response (EDR) solution in conjunction with or instead of network-based IDS/IPS.
Note: If you have a regulatory or other requirement for IDS/IPS use, ensure that it is always tuned to provide high quality alerts to your SIEM solution.
How to deploy Azure Firewall: https://docs.microsoft.com/azure/firewall/tutorial-firewall-deploy-portal
Azure Marketplace includes third party IDS capabilities: https://azuremarketplace.microsoft.com/marketplace?search=IDS
Microsoft Defender ATP EDR capability: https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-atp/overview-endpoint-detection-response
**Security Principle:**
Deploy a firewall to perform advanced filtering on network traffic to and from external networks. You can also use firewalls between internal segments to support a segmentation strategy. If required, use custom routes for your subnet to override the system route when you need to force the network traffic to go through a network appliance for security control purpose.
At a minimum, block known bad IP addresses and high-risk protocols, such as remote management (for example, RDP and SSH) and intranet protocols (for example, SMB and Kerberos).
**Azure Guidance:**
Use Azure Firewall to provide fully stateful application layer traffic restriction (such as URL filtering) and/or central management over a large number of enterprise segments or spokes (in a hub/spoke topology).
If you have a complex network topology, such as a hub/spoke setup, you may need to create user-defined routes (UDR) to ensure the traffic goes through the desired route. For example, you have option to use an UDR to redirect egress internet traffic through a specific Azure Firewall or a network virtual appliance.
**Implementation and additional context:**
How to deploy Azure Firewall:
https://docs.microsoft.com/azure/firewall/tutorial-firewall-deploy-portal
Virtual network traffic routing:
https://docs.microsoft.com/azure/virtual-network/virtual-networks-udr-overview
Verify and control/limit connections to and use of external information systems.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
External systems are systems or components of systems for which organizations typically have no direct supervision and authority over the application of security requirements and controls or the determination of the effectiveness of implemented controls on those systems. External systems include personally owned systems, components, or devices and privately-owned computing and communications devices resident in commercial or public facilities. This requirement also addresses the use of external systems for the processing, storage, or transmission of CUI, including accessing cloud services (e.g., infrastructure as a service, platform as a service, or software as a service) from organizational systems.
Organizations establish terms and conditions for the use of external systems in accordance with organizational security policies and procedures. Terms and conditions address as a minimum, the types of applications that can be accessed on organizational systems from external systems. If terms and conditions with the owners of external systems cannot be established, organizations may impose restrictions on organizational personnel using those external systems.
This requirement recognizes that there are circumstances where individuals using external systems (e.g., contractors, coalition partners) need to access organizational systems. In those situations, organizations need confidence that the external systems contain the necessary controls so as not to compromise, damage, or otherwise harm organizational systems. Verification that the required controls have been effectively implemented can be achieved by third-party, independent assessments, attestations, or other means, depending on the assurance or confidence level required by organizations.
Note that while “external” typically refers to outside of the organization’s direct supervision and authority, that is not always the case. Regarding the protection of CUI across an organization, the organization may have systems that process CUI and others that do not. And among the systems that process CUI there are likely access restrictions for CUI that apply between systems. Therefore, from the perspective of a given system, other systems within the organization may be considered “external" to that system.
Control the flow of CUI in accordance with approved authorizations.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
Information flow control regulates where information can travel within a system and between systems (versus who can access the information) and without explicit regard to subsequent accesses to that information. Flow control restrictions include the following: keeping exportcontrolled information from being transmitted in the clear to the Internet; blocking outside traffic that claims to be from within the organization; restricting requests to the Internet that are not from the internal web proxy server; and limiting information transfers between organizations based on data structures and content.
Organizations commonly use information flow control policies and enforcement mechanisms to control the flow of information between designated sources and destinations (e.g., networks, individuals, and devices) within systems and between interconnected systems. Flow control is based on characteristics of the information or the information path. Enforcement occurs in boundary protection devices (e.g., gateways, routers, guards, encrypted tunnels, firewalls) that employ rule sets or establish configuration settings that restrict system services, provide a packetfiltering capability based on header information, or message-filtering capability based on message content (e.g., implementing key word searches or using document characteristics). Organizations also consider the trustworthiness of filtering and inspection mechanisms (i.e., hardware, firmware, and software components) that are critical to information flow enforcement.
Transferring information between systems representing different security domains with different security policies introduces risk that such transfers violate one or more domain security policies. In such situations, information owners or stewards provide guidance at designated policy enforcement points between interconnected systems. Organizations consider mandating specific architectural solutions when required to enforce specific security policies. Enforcement includes: prohibiting information transfers between interconnected systems (i.e., allowing access only); employing hardware mechanisms to enforce one-way information flows; and implementing trustworthy regrading mechanisms to reassign security attributes and security labels.
Establish and enforce security configuration settings for information technology products employed in organizational systems.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
Configuration settings are the set of parameters that can be changed in hardware, software, or firmware components of the system that affect the security posture or functionality of the system. Information technology products for which security-related configuration settings can be defined include mainframe computers, servers, workstations, input and output devices (e.g., scanners, copiers, and printers), network components (e.g., firewalls, routers, gateways, voice and data switches, wireless access points, network appliances, sensors), operating systems, middleware, and applications.
Security parameters are those parameters impacting the security state of systems including the parameters required to satisfy other security requirements. Security parameters include: registry settings; account, file, directory permission settings; and settings for functions, ports, protocols, and remote connections. Organizations establish organization-wide configuration settings and subsequently derive specific configuration settings for systems. The established settings become part of the systems configuration baseline.
Common secure configurations (also referred to as security configuration checklists, lockdown and hardening guides, security reference guides, security technical implementation guides) provide recognized, standardized, and established benchmarks that stipulate secure configuration settings for specific information technology platforms/products and instructions for configuring those system components to meet operational requirements. Common secure configurations can be developed by a variety of organizations including information technology product developers, manufacturers, vendors, consortia, academia, industry, federal agencies, and other organizations in the public and private sectors.
Microsoft and the customer share responsibilities for implementing this requirement.
The monitoring, identification, and reporting of events are the foundation for incident identification and commence the incident life cycle. Events potentially affect the productivity of organizational assets and, in turn, associated services. These events must be captured and analyzed so that the organization can determine whether an event will become (or has become) an incident that requires organizational action. The extent to which an organization can identify events improves its ability to manage and control incidents and their potential effects.
Deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception).
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
This requirement applies to inbound and outbound network communications traffic at the system boundary and at identified points within the system. A deny-all, permit-by-exception network communications traffic policy ensures that only those connections which are essential and approved are allowed.
Monitor organizational systems, including inbound and outbound communications traffic, to detect attacks and indicators of potential attacks.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
System monitoring includes external and internal monitoring. External monitoring includes the observation of events occurring at the system boundary (i.e., part of perimeter defense and boundary protection). Internal monitoring includes the observation of events occurring within the system. Organizations can monitor systems, for example, by observing audit record activities in real time or by observing other system aspects such as access patterns, characteristics of access, and other actions. The monitoring objectives may guide determination of the events. System monitoring capability is achieved through a variety of tools and techniques (e.g., intrusion detection systems, intrusion prevention systems, malicious code protection software, scanning tools, audit record monitoring software, network monitoring software). Strategic locations for monitoring devices include selected perimeter locations and near server farms supporting critical applications, with such devices being employed at managed system interfaces. The granularity of monitoring information collected is based on organizational monitoring objectives and the capability of systems to support such objectives.
System monitoring is an integral part of continuous monitoring and incident response programs. Output from system monitoring serves as input to continuous monitoring and incident response programs. A network connection is any connection with a device that communicates through a network (e.g., local area network, Internet). A remote connection is any connection with a device communicating through an external network (e.g., the Internet). Local, network, and remote connections can be either wired or wireless.
Unusual or unauthorized activities or conditions related to inbound/outbound communications traffic include internal traffic that indicates the presence of malicious code in systems or propagating among system components, the unauthorized exporting of information, or signaling to external systems. Evidence of malicious code is used to identify potentially compromised systems or system components. System monitoring requirements, including the need for specific types of system monitoring, may be referenced in other requirements.
The information system enforces approved authorizations for controlling the flow of information within the system and between interconnected systems based on [Assignment: organization-defined information flow control policies].
Supplemental Guidance: Information flow control regulates where information is allowed to travel within an information system and between information systems (as opposed to who is allowed to access the information) and without explicit regard to subsequent accesses to that information. Flow control restrictions include, for example, keeping export-controlled information from being transmitted in the clear to the Internet, blocking outside traffic that claims to be from within the organization, restricting web requests to the Internet that are not from the internal web proxy server, and limiting information transfers between organizations based on data structures and content. Transferring information between information systems representing different security domains with different security policies introduces risk that such transfers violate one or more domain security policies. In such situations, information owners/stewards provide guidance at designated policy enforcement points between interconnected systems. Organizations consider mandating specific architectural solutions when required to enforce specific security policies. Enforcement includes, for example: (i) prohibiting information transfers between interconnected systems (i.e., allowing access only); (ii) employing hardware mechanisms to enforce one-way information flows; and (iii) implementing trustworthy regarding mechanisms to reassign security attributes and security labels.
Organizations commonly employ information flow control policies and enforcement mechanisms to control the flow of information between designated sources and destinations (e.g., networks, individuals, and devices) within information systems and between interconnected systems. Flow control is based on the characteristics of the information and/or the information path. Enforcement occurs, for example, in boundary protection devices (e.g., gateways, routers, guards, encrypted tunnels, firewalls) that employ rule sets or establish configuration settings that restrict information system services, provide a packet-filtering capability based on header information, or message- filtering capability based on message content (e.g., implementing key word searches or using document characteristics). Organizations also consider the trustworthiness of filtering/inspection mechanisms (i.e., hardware, firmware, and software components) that are critical to information flow enforcement. Control enhancements 3 through 22 primarily address cross-domain solution needs which focus on more advanced filtering techniques, in-depth analysis, and stronger flow enforcement mechanisms implemented in cross-domain products, for example, high-assurance guards. Such capabilities are generally not available in commercial off-the-shelf information technology products. Related controls: AC-3, AC-17, AC-19, AC-21, CM-6, CM-7, SA-8, SC-2, SC-5, SC-7, SC-18.
References: None.
The information system:
a. Monitors and controls communications at the external boundary of the system and at key internal boundaries within the system;
b. Implements subnetworks for publicly accessible system components that are [Selection: physically; logically] separated from internal organizational networks; and
c. Connects to external networks or information systems only through managed interfaces consisting of boundary protection devices arranged in accordance with an organizational security architecture.
Supplemental Guidance: Managed interfaces include, for example, gateways, routers, firewalls, guards, network-based malicious code analysis and virtualization systems, or encrypted tunnels implemented within a security architecture (e.g., routers protecting firewalls or application gateways residing on protected subnetworks). Subnetworks that are physically or logically separated from internal networks are referred to as demilitarized zones or DMZs. Restricting or prohibiting interfaces within organizational information systems includes, for example, restricting external web traffic to designated web servers within managed interfaces and prohibiting external traffic that appears to be spoofing internal addresses. Organizations consider the shared nature of commercial telecommunications services in the implementation of security controls associated with the use of such services. Commercial telecommunications services are commonly based on network components and consolidated management systems shared by all attached commercial customers, and may also include third party-provided access lines and other service elements. Such transmission services may represent sources of increased risk despite contract security provisions. Related controls: AC-4, AC-17, CA-3, CM-7, CP-8, IR-4, RA-3, SC-5, SC-13.
References: FIPS Publication 199; NIST Special Publications 800-41, 800-77.
The organization limits the number of external network connections to the information system.
Supplemental Guidance: Limiting the number of external network connections facilitates more comprehensive monitoring of inbound and outbound communications traffic. The Trusted Internet Connection (TIC) initiative is an example of limiting the number of external network connections.
The organization:
a. Monitors the information system to detect:
1. Attacks and indicators of potential attacks in accordance with [Assignment: organization- defined monitoring objectives]; and
2. Unauthorized local, network, and remote connections;
b. Identifies unauthorized use of the information system through [Assignment: organization- defined techniques and methods];
c. Deploys monitoring devices: (i) strategically within the information system to collect organization-determined essential information; and (ii) at ad hoc locations within the system to track specific types of transactions of interest to the organization;
d. Protects information obtained from intrusion-monitoring tools from unauthorized access, modification, and deletion;
e. Heightens the level of information system monitoring activity whenever there is an indication of increased risk to organizational operations and assets, individuals, other organizations, or the Nation based on law enforcement information, intelligence information, or other credible sources of information;
f. Obtains legal opinion with regard to information system monitoring activities in accordance with applicable federal laws, Executive Orders, directives, policies, or regulations; and
g. Provides [Assignment: or ganization-defined information system monitoring information] to [Assignment: organization-defined personnel or roles] [Selection (one or more): as needed; [Assignment: organization-defined frequency]].
Supplemental Guidance: Information system monitoring includes external and internal monitoring. External monitoring includes the observation of events occurring at the information system boundary (i.e., part of perimeter defense and boundary protection). Internal monitoring includes the observation of events occurring within the information system. Organizations can monitor information systems, for example, by observing audit activities in real time or by observing other system aspects such as access patterns, characteristics of access, and other actions. The monitoring objectives may guide determination of the events. Information system monitoring capability is achieved through a variety of tools and techniques (e.g., intrusion detection systems, intrusion prevention systems, malicious code protection software, scanning tools, audit record monitoring software, network monitoring software). Strategic locations for monitoring devices include, for example, selected perimeter locations and near server farms supporting critical applications, with such devices typically being employed at the managed interfaces associated with controls SC-7 and AC-17. Einstein network monitoring devices from the Department of Homeland Security can also be included as monitoring devices. The granularity of monitoring information collected is based on organizational monitoring objectives and the capability of information systems to support such objectives. Specific types of transactions of interest include, for example, Hyper Text Transfer Protocol (HTTP) traffic that bypasses HTTP proxies. Information system monitoring is an integral part of organizational continuous monitoring and incident response programs. Output from system monitoring serves as input to continuous monitoring and incident response programs. A network connection is any connection with a device that communicates through a network (e.g., local area network, Internet). A remote connection is any connection with a device communicating through an external network (e.g., the Internet). Local, network, and remote connections can be either wired or wireless. Related controls: AC-3, AC-4, AC-8, AC-17, AU-2, AU-6, AU-7, AU-9, AU-12, CA-7, IR-4, PE-3, RA-5, SC-7, SC-26, SC-35, SI-3, SI-7.
References: NIST Special Publications 800-61, 800-83, 800-92, 800-94, 800-137.
The information system enforces approved authorizations for controlling the flow of information within the system and between interconnected systems based on [Assignment: organization-defined information flow control policies].
Supplemental Guidance: Information flow control regulates where information is allowed to travel within an information system and between information systems (as opposed to who is allowed to access the information) and without explicit regard to subsequent accesses to that information. Flow control restrictions include, for example, keeping export-controlled information from being transmitted in the clear to the Internet, blocking outside traffic that claims to be from within the organization, restricting web requests to the Internet that are not from the internal web proxy server, and limiting information transfers between organizations based on data structures and content. Transferring information between information systems representing different security domains with different security policies introduces risk that such transfers violate one or more domain security policies. In such situations, information owners/stewards provide guidance at designated policy enforcement points between interconnected systems. Organizations consider mandating specific architectural solutions when required to enforce specific security policies. Enforcement includes, for example: (i) prohibiting information transfers between interconnected systems (i.e., allowing access only); (ii) employing hardware mechanisms to enforce one-way information flows; and (iii) implementing trustworthy regarding mechanisms to reassign security attributes and security labels.
Organizations commonly employ information flow control policies and enforcement mechanisms to control the flow of information between designated sources and destinations (e.g., networks, individuals, and devices) within information systems and between interconnected systems. Flow control is based on the characteristics of the information and/or the information path. Enforcement occurs, for example, in boundary protection devices (e.g., gateways, routers, guards, encrypted tunnels, firewalls) that employ rule sets or establish configuration settings that restrict information system services, provide a packet-filtering capability based on header information, or message- filtering capability based on message content (e.g., implementing key word searches or using document characteristics). Organizations also consider the trustworthiness of filtering/inspection mechanisms (i.e., hardware, firmware, and software components) that are critical to information flow enforcement. Control enhancements 3 through 22 primarily address cross-domain solution needs which focus on more advanced filtering techniques, in-depth analysis, and stronger flow enforcement mechanisms implemented in cross-domain products, for example, high-assurance guards. Such capabilities are generally not available in commercial off-the-shelf information technology products. Related controls: AC-3, AC-17, AC-19, AC-21, CM-6, CM-7, SA-8, SC-2, SC-5, SC-7, SC-18.
References: None.
The information system:
a. Monitors and controls communications at the external boundary of the system and at key internal boundaries within the system;
b. Implements subnetworks for publicly accessible system components that are [Selection: physically; logically] separated from internal organizational networks; and
c. Connects to external networks or information systems only through managed interfaces consisting of boundary protection devices arranged in accordance with an organizational security architecture.
Supplemental Guidance: Managed interfaces include, for example, gateways, routers, firewalls, guards, network-based malicious code analysis and virtualization systems, or encrypted tunnels implemented within a security architecture (e.g., routers protecting firewalls or application gateways residing on protected subnetworks). Subnetworks that are physically or logically separated from internal networks are referred to as demilitarized zones or DMZs. Restricting or prohibiting interfaces within organizational information systems includes, for example, restricting external web traffic to designated web servers within managed interfaces and prohibiting external traffic that appears to be spoofing internal addresses. Organizations consider the shared nature of commercial telecommunications services in the implementation of security controls associated with the use of such services. Commercial telecommunications services are commonly based on network components and consolidated management systems shared by all attached commercial customers, and may also include third party-provided access lines and other service elements. Such transmission services may represent sources of increased risk despite contract security provisions. Related controls: AC-4, AC-17, CA-3, CM-7, CP-8, IR-4, RA-3, SC-5, SC-13.
References: FIPS Publication 199; NIST Special Publications 800-41, 800-77.
The organization limits the number of external network connections to the information system.
Supplemental Guidance: Limiting the number of external network connections facilitates more comprehensive monitoring of inbound and outbound communications traffic. The Trusted Internet Connection (TIC) initiative is an example of limiting the number of external network connections.
The organization:
a. Monitors the information system to detect:
1. Attacks and indicators of potential attacks in accordance with [Assignment: organization- defined monitoring objectives]; and
2. Unauthorized local, network, and remote connections;
b. Identifies unauthorized use of the information system through [Assignment: organization- defined techniques and methods];
c. Deploys monitoring devices: (i) strategically within the information system to collect organization-determined essential information; and (ii) at ad hoc locations within the system to track specific types of transactions of interest to the organization;
d. Protects information obtained from intrusion-monitoring tools from unauthorized access, modification, and deletion;
e. Heightens the level of information system monitoring activity whenever there is an indication of increased risk to organizational operations and assets, individuals, other organizations, or the Nation based on law enforcement information, intelligence information, or other credible sources of information;
f. Obtains legal opinion with regard to information system monitoring activities in accordance with applicable federal laws, Executive Orders, directives, policies, or regulations; and
g. Provides [Assignment: or ganization-defined information system monitoring information] to [Assignment: organization-defined personnel or roles] [Selection (one or more): as needed; [Assignment: organization-defined frequency]].
Supplemental Guidance: Information system monitoring includes external and internal monitoring. External monitoring includes the observation of events occurring at the information system boundary (i.e., part of perimeter defense and boundary protection). Internal monitoring includes the observation of events occurring within the information system. Organizations can monitor information systems, for example, by observing audit activities in real time or by observing other system aspects such as access patterns, characteristics of access, and other actions. The monitoring objectives may guide determination of the events. Information system monitoring capability is achieved through a variety of tools and techniques (e.g., intrusion detection systems, intrusion prevention systems, malicious code protection software, scanning tools, audit record monitoring software, network monitoring software). Strategic locations for monitoring devices include, for example, selected perimeter locations and near server farms supporting critical applications, with such devices typically being employed at the managed interfaces associated with controls SC-7 and AC-17. Einstein network monitoring devices from the Department of Homeland Security can also be included as monitoring devices. The granularity of monitoring information collected is based on organizational monitoring objectives and the capability of information systems to support such objectives. Specific types of transactions of interest include, for example, Hyper Text Transfer Protocol (HTTP) traffic that bypasses HTTP proxies. Information system monitoring is an integral part of organizational continuous monitoring and incident response programs. Output from system monitoring serves as input to continuous monitoring and incident response programs. A network connection is any connection with a device that communicates through a network (e.g., local area network, Internet). A remote connection is any connection with a device communicating through an external network (e.g., the Internet). Local, network, and remote connections can be either wired or wireless. Related controls: AC-3, AC-4, AC-8, AC-17, AU-2, AU-6, AU-7, AU-9, AU-12, CA-7, IR-4, PE-3, RA-5, SC-7, SC-26, SC-35, SI-3, SI-7.
References: NIST Special Publications 800-61, 800-83, 800-92, 800-94, 800-137.
Control the flow of CUI in accordance with approved authorizations.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
Information flow control regulates where information can travel within a system and between systems (versus who can access the information) and without explicit regard to subsequent accesses to that information. Flow control restrictions include the following: keeping export-controlled information from being transmitted in the clear to the Internet; blocking outside traffic that claims to be from within the organization; restricting requests to the Internet that are not from the internal web proxy server; and limiting information transfers between organizations based on data structures and content. Organizations commonly use information flow control policies and enforcement mechanisms to control the flow of information between designated sources and destinations (e.g., networks, individuals, and devices) within systems and between interconnected systems. Flow control is based on characteristics of the information or the information path. Enforcement occurs in boundary protection devices (e.g., gateways, routers, guards, encrypted tunnels, firewalls) that employ rule sets or establish configuration settings that restrict system services, provide a packet-filtering capability based on header information, or message-filtering capability based on message content (e.g., implementing key word searches or using document characteristics). Organizations also consider the trustworthiness of filtering and inspection mechanisms (i.e., hardware, firmware, and software components) that are critical to information flow enforcement. Transferring information between systems representing different security domains with different security policies introduces risk that such transfers violate one or more domain security policies. In such situations, information owners or stewards provide guidance at designated policy enforcement points between interconnected systems. Organizations consider mandating specific architectural solutions when required to enforce specific security policies. Enforcement includes: prohibiting information transfers between interconnected systems (i.e., allowing access only); employing hardware mechanisms to enforce one-way information flows; and implementing trustworthy regrading mechanisms to reassign security attributes and security labels.
Monitor, control, and protect communications (i.e., information transmitted or received by organizational systems) at the external boundaries and key internal boundaries of organizational systems.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
Communications can be monitored, controlled, and protected at boundary components and by restricting or prohibiting interfaces in organizational systems. Boundary components include gateways, routers, firewalls, guards, network-based malicious code analysis and virtualization systems, or encrypted tunnels implemented within a system security architecture (e.g., routers protecting firewalls or application gateways residing on protected subnetworks). Restricting or prohibiting interfaces in organizational systems includes restricting external web communications traffic to designated web servers within managed interfaces and prohibiting external traffic that appears to be spoofing internal addresses. Organizations consider the shared nature of commercial telecommunications services in the implementation of security requirements associated with the use of such services. Commercial telecommunications services are commonly based on network components and consolidated management systems shared by all attached commercial customers and may also include third party-provided access lines and other service elements. Such transmission services may represent sources of increased risk despite contract security provisions. [SP 800-41] provides guidance on firewalls and firewall policy. [SP 800-125B] provides guidance on security for virtualization technologies.
[28] There is no prescribed format or specified level of detail for system security plans. However, organizations ensure that the required information in 3.12.4 is conveyed in those plans.
Employ architectural designs, software development techniques, and systems engineering principles that promote effective information security within organizational systems.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
Organizations apply systems security engineering principles to new development systems or systems undergoing major upgrades. For legacy systems, organizations apply systems security engineering principles to system upgrades and modifications to the extent feasible, given the current state of hardware, software, and firmware components within those systems. The application of systems security engineering concepts and principles helps to develop trustworthy, secure, and resilient systems and system components and reduce the susceptibility of organizations to disruptions, hazards, and threats. Examples of these concepts and principles include developing layered protections; establishing security policies, architecture, and controls as the foundation for design; incorporating security requirements into the system development life cycle; delineating physical and logical security boundaries; ensuring that developers are trained on how to build secure software; and performing threat modeling to identify use cases, threat agents, attack vectors and patterns, design patterns, and compensating controls needed to mitigate risk. Organizations that apply security engineering concepts and principles can facilitate the development of trustworthy, secure systems, system components, and system services; reduce risk to acceptable levels; and make informed risk-management decisions. [SP 800-160-1] provides guidance on systems security engineering.
Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
Subnetworks that are physically or logically separated from internal networks are referred to as demilitarized zones (DMZs). DMZs are typically implemented with boundary control devices and techniques that include routers, gateways, firewalls, virtualization, or cloud-based technologies. [SP 800-41] provides guidance on firewalls and firewall policy. [SP 800-125B] provides guidance on security for virtualization technologies
Deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception).
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
This requirement applies to inbound and outbound network communications traffic at the system boundary and at identified points within the system. A deny-all, permit-by-exception network communications traffic policy ensures that only those connections which are essential and approved are allowed.
Monitor organizational systems, including inbound and outbound communications traffic, to detect attacks and indicators of potential attacks.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
System monitoring includes external and internal monitoring. External monitoring includes the observation of events occurring at the system boundary (i.e., part of perimeter defense and boundary protection). Internal monitoring includes the observation of events occurring within the system. Organizations can monitor systems, for example, by observing audit record activities in real time or by observing other system aspects such as access patterns, characteristics of access, and other actions. The monitoring objectives may guide determination of the events. System monitoring capability is achieved through a variety of tools and techniques (e.g., intrusion detection systems, intrusion prevention systems, malicious code protection software, scanning tools, audit record monitoring software, network monitoring software). Strategic locations for monitoring devices include selected perimeter locations and near server farms supporting critical applications, with such devices being employed at managed system interfaces. The granularity of monitoring information collected is based on organizational monitoring objectives and the capability of systems to support such objectives. System monitoring is an integral part of continuous monitoring and incident response programs. Output from system monitoring serves as input to continuous monitoring and incident response programs. A network connection is any connection with a device that communicates through a network (e.g., local area network, Internet). A remote connection is any connection with a device communicating through an external network (e.g., the Internet). Local, network, and remote connections can be either wired or wireless. Unusual or unauthorized activities or conditions related to inbound/outbound communications traffic include internal traffic that indicates the presence of malicious code in systems or propagating among system components, the unauthorized exporting of information, or signaling to external systems. Evidence of malicious code is used to identify potentially compromised systems or system components. System monitoring requirements, including the need for specific types of system monitoring, may be referenced in other requirements. [SP 800-94] provides guidance on intrusion detection and prevention systems.
Identify unauthorized use of organizational systems.
Shared
Microsoft and the customer share responsibilities for implementing this requirement.
System monitoring includes external and internal monitoring. System monitoring can detect unauthorized use of organizational systems. System monitoring is an integral part of continuous monitoring and incident response programs. Monitoring is achieved through a variety of tools and techniques (e.g., intrusion detection systems, intrusion prevention systems, malicious code protection software, scanning tools, audit record monitoring software, network monitoring software). Output from system monitoring serves as input to continuous monitoring and incident response programs. Unusual/unauthorized activities or conditions related to inbound and outbound communications traffic include internal traffic that indicates the presence of malicious code in systems or propagating among system components, the unauthorized exporting of information, or signaling to external systems. Evidence of malicious code is used to identify potentially compromised systems or system components. System monitoring requirements, including the need for specific types of system monitoring, may be referenced in other requirements. [SP 800-94] provides guidance on intrusion detection and prevention systems.
The information system enforces approved authorizations for controlling the flow of information within the system and between interconnected systems based on [Assignment: organization-defined information flow control policies].
Supplemental Guidance: Information flow control regulates where information is allowed to travel within an information system and between information systems (as opposed to who is allowed to access the information) and without explicit regard to subsequent accesses to that information. Flow control restrictions include, for example, keeping export-controlled information from being transmitted in the clear to the Internet, blocking outside traffic that claims to be from within the organization, restricting web requests to the Internet that are not from the internal web proxy server, and limiting information transfers between organizations based on data structures and content. Transferring information between information systems representing different security domains with different security policies introduces risk that such transfers violate one or more domain security policies. In such situations, information owners/stewards provide guidance at designated policy enforcement points between interconnected systems. Organizations consider mandating specific architectural solutions when required to enforce specific security policies. Enforcement includes, for example: (i) prohibiting information transfers between interconnected systems (i.e., allowing access only); (ii) employing hardware mechanisms to enforce one-way information flows; and (iii) implementing trustworthy regarding mechanisms to reassign security attributes and security labels.
Organizations commonly employ information flow control policies and enforcement mechanisms to control the flow of information between designated sources and destinations (e.g., networks, individuals, and devices) within information systems and between interconnected systems. Flow control is based on the characteristics of the information and/or the information path. Enforcement occurs, for example, in boundary protection devices (e.g., gateways, routers, guards, encrypted tunnels, firewalls) that employ rule sets or establish configuration settings that restrict information system services, provide a packet-filtering capability based on header information, or message- filtering capability based on message content (e.g., implementing key word searches or using document characteristics). Organizations also consider the trustworthiness of filtering/inspection mechanisms (i.e., hardware, firmware, and software components) that are critical to information flow enforcement. Control enhancements 3 through 22 primarily address cross-domain solution needs which focus on more advanced filtering techniques, in-depth analysis, and stronger flow enforcement mechanisms implemented in cross-domain products, for example, high-assurance guards. Such capabilities are generally not available in commercial off-the-shelf information technology products. Related controls: AC-3, AC-17, AC-19, AC-21, CM-6, CM-7, SA-8, SC-2, SC-5, SC-7, SC-18.
References: None.
The information system:
a. Monitors and controls communications at the external boundary of the system and at key internal boundaries within the system;
b. Implements subnetworks for publicly accessible system components that are [Selection: physically; logically] separated from internal organizational networks; and
c. Connects to external networks or information systems only through managed interfaces consisting of boundary protection devices arranged in accordance with an organizational security architecture.
Supplemental Guidance: Managed interfaces include, for example, gateways, routers, firewalls, guards, network-based malicious code analysis and virtualization systems, or encrypted tunnels implemented within a security architecture (e.g., routers protecting firewalls or application gateways residing on protected subnetworks). Subnetworks that are physically or logically separated from internal networks are referred to as demilitarized zones or DMZs. Restricting or prohibiting interfaces within organizational information systems includes, for example, restricting external web traffic to designated web servers within managed interfaces and prohibiting external traffic that appears to be spoofing internal addresses. Organizations consider the shared nature of commercial telecommunications services in the implementation of security controls associated with the use of such services. Commercial telecommunications services are commonly based on network components and consolidated management systems shared by all attached commercial customers, and may also include third party-provided access lines and other service elements. Such transmission services may represent sources of increased risk despite contract security provisions. Related controls: AC-4, AC-17, CA-3, CM-7, CP-8, IR-4, RA-3, SC-5, SC-13.
References: FIPS Publication 199; NIST Special Publications 800-41, 800-77.
The organization limits the number of external network connections to the information system.
Supplemental Guidance: Limiting the number of external network connections facilitates more comprehensive monitoring of inbound and outbound communications traffic. The Trusted Internet Connection (TIC) initiative is an example of limiting the number of external network connections.
The organization:
a. Monitors the information system to detect:
1. Attacks and indicators of potential attacks in accordance with [Assignment: organization- defined monitoring objectives]; and
2. Unauthorized local, network, and remote connections;
b. Identifies unauthorized use of the information system through [Assignment: organization- defined techniques and methods];
c. Deploys monitoring devices: (i) strategically within the information system to collect organization-determined essential information; and (ii) at ad hoc locations within the system to track specific types of transactions of interest to the organization;
d. Protects information obtained from intrusion-monitoring tools from unauthorized access, modification, and deletion;
e. Heightens the level of information system monitoring activity whenever there is an indication of increased risk to organizational operations and assets, individuals, other organizations, or the Nation based on law enforcement information, intelligence information, or other credible sources of information;
f. Obtains legal opinion with regard to information system monitoring activities in accordance with applicable federal laws, Executive Orders, directives, policies, or regulations; and
g. Provides [Assignment: or ganization-defined information system monitoring information] to [Assignment: organization-defined personnel or roles] [Selection (one or more): as needed; [Assignment: organization-defined frequency]].
Supplemental Guidance: Information system monitoring includes external and internal monitoring. External monitoring includes the observation of events occurring at the information system boundary (i.e., part of perimeter defense and boundary protection). Internal monitoring includes the observation of events occurring within the information system. Organizations can monitor information systems, for example, by observing audit activities in real time or by observing other system aspects such as access patterns, characteristics of access, and other actions. The monitoring objectives may guide determination of the events. Information system monitoring capability is achieved through a variety of tools and techniques (e.g., intrusion detection systems, intrusion prevention systems, malicious code protection software, scanning tools, audit record monitoring software, network monitoring software). Strategic locations for monitoring devices include, for example, selected perimeter locations and near server farms supporting critical applications, with such devices typically being employed at the managed interfaces associated with controls SC-7 and AC-17. Einstein network monitoring devices from the Department of Homeland Security can also be included as monitoring devices. The granularity of monitoring information collected is based on organizational monitoring objectives and the capability of information systems to support such objectives. Specific types of transactions of interest include, for example, Hyper Text Transfer Protocol (HTTP) traffic that bypasses HTTP proxies. Information system monitoring is an integral part of organizational continuous monitoring and incident response programs. Output from system monitoring serves as input to continuous monitoring and incident response programs. A network connection is any connection with a device that communicates through a network (e.g., local area network, Internet). A remote connection is any connection with a device communicating through an external network (e.g., the Internet). Local, network, and remote connections can be either wired or wireless. Related controls: AC-3, AC-4, AC-8, AC-17, AU-2, AU-6, AU-7, AU-9, AU-12, CA-7, IR-4, PE-3, RA-5, SC-7, SC-26, SC-35, SI-3, SI-7.
References: NIST Special Publications 800-61, 800-83, 800-92, 800-94, 800-137.
Enforce approved authorizations for controlling the flow of information within the system and between connected systems based on [Assignment: organization-defined information flow control policies].
a. Monitor and control communications at the external managed interfaces to the system and at key internal managed interfaces within the system;
b. Implement subnetworks for publicly accessible system components that are [Selection: physically;logically] separated from internal organizational networks; and
c. Connect to external networks or systems only through managed interfaces consisting of boundary protection devices arranged in accordance with an organizational security and privacy architecture.
a. Monitor the system to detect:
1. Attacks and indicators of potential attacks in accordance with the following monitoring objectives: [Assignment: organization-defined monitoring objectives]; and
2. Unauthorized local, network, and remote connections;
b. Identify unauthorized use of the system through the following techniques and methods: [Assignment: organization-defined techniques and methods];
c. Invoke internal monitoring capabilities or deploy monitoring devices:
1. Strategically within the system to collect organization-determined essential information; and
2. At ad hoc locations within the system to track specific types of transactions of interest to the organization;
d. Analyze detected events and anomalies;
e. Adjust the level of system monitoring activity when there is a change in risk to organizational operations and assets, individuals, other organizations, or the Nation;
f. Obtain legal opinion regarding system monitoring activities; and
g. Provide [Assignment: organization-defined system monitoring information] to [Assignment: organization-defined personnel or roles] [Selection (OneOrMore): as needed; [Assignment: organization-defined frequency] ] .
Consider implementingsecure web gateways with capability to deep scan network packets including secure (HTTPS, etc.) traffic passing through the web/internet gateway
Boundary defences should be multi-layered with properly configured firewalls, proxies, DMZ perimeter networks, and network--???based IPS and IDS. Mechanism to filter both inbound and outbound traffic to be put in place.
Maintain an up-to-date/centralised inventory of authorised devices connected to bank???s network (within/outside bank???s premises) and authorised devices enabling the bank???s network. The bank may consider implementing solutions to automate network discovery and management.
Ensure that all the network devices are configured appropriately and periodically assess whether the configurations are appropriate to the desired level of network security.
NBFCs are required to form an IT Strategy Committee. The chairman of the committee shall be an independent director and CIO & CTO should be a part of the committee. The IT Strategy Committee should meet at an appropriate frequency but not more than six months should elapse between two meetings. The Committee shall work in partnership with other Board committees and Senior Management to provide input to them. It will also carry out review and amend the IT strategies in line with the corporate strategies, Board Policy reviews, cyber security arrangements and any other matter related to IT Governance. Its deliberations may be placed before the Board.
The objective of the IS Audit is to provide an insight on the effectiveness of controls that are in place to ensure confidentiality, integrity and availability of the organization???s IT infrastructure. IS Audit shall identify risks and methods to mitigate risk arising out of IT infrastructure such as server architecture, local and wide area networks, physical and information security, telecommunications etc.
Security measures against threats outside system boundaries
Shared
The customer is responsible for implementing this recommendation.
• Restricts Access — The types of activities that can occur through a communication
channel (for example, FTP site, router port) are restricted.
• Protects Identification and Authentication Credentials — Identification and authentication credentials are protected during transmission outside its system boundaries.
• Requires Additional Authentication or Credentials — Additional authentication information or credentials are required when accessing the system from outside its
boundaries.
• Implements Boundary Protection Systems — Boundary protection systems (for example, firewalls, demilitarized zones, and intrusion detection systems) are implemented to protect external access points from attempts and unauthorized access and
are monitored to detect such attempts
Ensure the protection of the user's local SWIFT infrastructure from potentially compromised elements of the general IT environment and external environment.
1. Restrict Internet Access & Protect Critical Systems from General IT Environment
Ensure the protection of the user's local SWIFT infrastructure from potentially compromised elements of the general IT environment and external environment.
Shared
n/a
A separated secure zone safeguards the user's SWIFT infrastructure from compromises and attacks on the broader enterprise and external environments.
1. Restrict Internet Access & Protect Critical Systems from General IT Environment
Control/Protect Internet access from operator PCs and systems within the secure zone.
Shared
n/a
All general-purpose and dedicated operator PCs, as well as systems within the secure zone, have controlled direct internet access in line with business.
1. Restrict Internet Access & Protect Critical Systems from General IT Environment
Ensure the protection of the customer’s connectivity infrastructure from external environment and potentially compromised elements of the general IT environment.
Shared
n/a
A separated secure zone safeguards the customer's infrastructure used for external connectivity from external environments and compromises or attacks on the broader enterprise environment.